| Customization: | Available |
|---|---|
| Rated Voltage: | 21/35kv 26/35kv |
| Accessories Type: | 1/3cores |
|
Still deciding? Get samples of US$ 20/Piece
Request Sample
|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
35kV cold shrink cable accessories are suitable for21/35,26/35kV single core, three-core polyethylene and cross-linked polyethylene power cables. Cold shrink cable accessories are made of liquid silicone rubber materials, which not only have very good electrical properties, but also have excellent hydrophobicity, high elasticity, long service life and constant shrinkage pressure and other physical properties. Cold shrink cable accessories do not require open flames or special tools. Just gently pull out the plastic support strip, and it will automatically shrink and reset. The installation is very convenient for work. It has good electrical and mechanical properties and can be used for a long time in various harsh environmental conditions.
| Main material performance | Parameter | Main product performance | Parameter |
| Hardness Shore (A) | 84±3 | AC withstand voltage test | 117kV, 5 minutes |
| Tensile strength (Mpa) | ≥14 | Partial discharge test at room temperature | 45KV |
| Permanent deformation rate | ≤5% | Impact voltage test | 200kV 95°C ~100°C, |
| Volume resistivity(Ω.cm) | ≥1X1014 | Partial discharge test at high temperature | 45kV 95C ~100°C, |
| Breakdown strength (kV/mm) | ≥20 | Constant voltage load cycle test in air | 65kV |
| Dielectric constant | ≈25 | Short circuit dynamic stability test | 85.0kA |
| No. | Applicable cable cross section | Outdoor termination kit | Indoor termination kit | Straight throught joint kit |
| 1 | 50-120 | WLS-35/3.1 | NLS-35/3.1 | JLS-35/3.1 |
| 2 | 150-240 | WLS-35/3.2 | NLS-35/3.2 | JLS-35/3.2 |
| 3 | 300-500 | WLS-35/3.3 | NLS-35/3.3 | JLS-35/3.3 |
){kind=link}