| Customization: | Available |
|---|---|
| Certification: | RoHS |
| Usage: | Cable |
|
Still deciding? Get samples of US$ 20/Piece
Request Sample
|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Manufactured from cross-linked polyolefin.
Providing outer sealing protection for power cable joints up to 42kV.
Used in 1kV cable joints and terminations to provide electrical insulation (050 andbelow).
Outstanding abrasion and chemical resistance.
Inner coated with adhesive at both ends. Tubes inner coated with adhesive at full lengthare available upon customer request.
Shrink temperature: start at 90°C, and fully recovered at130°C.
Color: black, red, yellow, blue, green(050 and below); black only(above 050). Other colors are available upon customer request.
| Spec. | As Supplied(mm) | After Recovered | ||
| Inner Diameter Min | Wall Thickness(T:±0.2) | Inner Diameter Max | Wall Thickness(T:±0.3) | |
| ALRSHG-10/5 | 10 | 0.5 | 5 | 1.1 |
| ALRSHG-15/7 | 15 | 0.5 | 7 | 1.1 |
| ALRSHG-20/9 | 20 | 0.6 | 9 | 1.5 |
| ALRSHG-30/11 | 30 | 0.7 | 11 | 1.6 |
| ALRSHG-35/13 | 35 | 0.7 | 13 | 1.8 |
| ALRSHG-45/17 | 45 | 0.8 | 17 | 2 |
| ALRSHG-50/23 | 50 | 1.1 | 23 | 2.5 |
| ALRSHG-60/23 | 60 | 1 | 23 | 2.5 |
| ALRSHG-85/30 | 85 | 1 | 30 | 2.8 |
| ALRSHG-100/39 | 100 | 1.1 | 39 | 3 |
| ALRSHG-120/45 | 120 | 1.1 | 45 | 3 |
| ALRSHG-140/49 | 140 | 1.2 | 49 | 3.6 |
| ALRSHG-160/57 | 160 | 1.2 | 57 | 3.6 |
| ALRSHG-180/61 | 180 | 1.3 | 61 | 4 |
| ALRSHG-200/70 | 200 | 1.5 | 70 | 4.4 |
| ALRSHG-230/72 | 220 | 1.4 | 72 | 4.4 |
| ALRSHG-250/87 | 250 | 1.6 | 87 | 4.4 |
| ALRSHG-300/100 | 290 | 1.4 | 100 | 4.4 |
| Property | Test Method | Standard Value |
| Tensile Strength | ASTM-D-638 | ≥12MPa |
| Elongation at Break | ASTM-D-638 | ≥300% |
| Volume Resistivity | IEC 60093 | ≥1X10¹³Ω.cm |
| Brittle Temperature | ISO 974 | -40ºC |
| Heat Shock | 160C,4h | No Crack |
| Water Absorption(23±2)C 24h | ISO 62 | ≤0.1% |
| Hardness(Shore A) | ISO 868 | ≥80 |
| Longitudinal Shrinkage | ASTM-D-2671 | ≤5% |
){kind=link}