Dual Wall Adhesive-Lined Polyolefin Heat Shrink Tubing
Product Description
The SBRS-(4X)G is a dual wall adhesive-lined polyolefin heat shrink tubing that provides exceptional environmental sealing for a variety of electrical applications. It is ideal for use in automotive and marine wire harnesses, wire splices, breakouts, and connector-to-cable transitions.
• Shrink Ratio: 4:1
• Features:
• Superior sealing against water, moisture, and other contaminants.
• Ideal for connector sealing covering large diameter differences.
• Inner adhesive bonds well to plastics, steel, and polyethylene.
• Supports continuous operating temperatures from -45°C to 125°C.
• Fully shrinks at temperatures ≥125°C.
• Certifications: RoHS, UL, C
Technical Specifications:
• Dimensions:
• Available sizes range from 5/32 inch (4.0 mm) to 2 inch (52.0 mm).
• Expanded inner diameter ranges from 4.0 mm to 52.0 mm.
• After recovery inner diameter ranges from 1.0 mm to 13.0 mm.
• Total wall thickness ranges from 1.05 ± 0.30 mm to 3.35 ± 0.50 mm.
• Adhesive thickness ranges from 0.50 ± 0.30 mm to 0.95 ± 0.30 mm.
• Standard package length varies from 25 meters per roll to 200 meters per spool.
• Technical Data:
• Tensile Strength: ≥10.4 MPa (12.68 typical)
• Elongation: ≥200% (484.72% typical)
• Tensile Strength after aging: ≥7.3 MPa (11.45 typical)
• Elongation after aging: ≥100% (119.04% typical)
• Flammability: Pass
• Dielectric Strength: ≥15 kV/mm (18.25 typical)
• Volume Resistivity: ≥1×10^14 Ω.cm (1.86×10^14 typical)
• Adhesive Properties:
• Water Absorption: <0.2%
• Softening Point: 95 ± 5°C
• Strength of Peeling (PE): 120N/25mm
• Strength of Peeling (AL): 80N/25mm
| SBRS-(4X)G Dual Wall Adhesive-Line Polyolefin Heat Shrink Tubing |
Audited Supplier 
){kind=link}