Raychem 3m Similar Heat Shrink Right Angle/in-Line Bushing Boot

• Customization: Available
• Certification: ISO
• Usage: Cable
• Model NO.: Heat Shrink Right Angle/In-line Bushing Boot
• Color: Red
• IP Rating: IP50
• Head Code: Circular
• Material: PE
• Transport Package: Bags, Cartons
• Specification: Heat Shrink Right Angle/In-line Bushing Boot
• Origin: China

Product Description

Manufactured from polyolefin, inner coated with hot-melt adhesive at the ends. Excellent insulation, flame retardant, thermal stability, etc. Used to protect cable against flashover or surges induced in switchgear and transformer. Shaped components to meet a range of requirements.
Heat Shrinkable Insulating Boots can be used over medium voltage terminations to insulate bushings in cable boxes up to 36kV, particularly where the normal clearance between phase to phase and phase to earth is less than the required value.
This kit contains both Straight & Right-Angled Boots
Provide protection against flashover in the event of any surge impulse, high humidity or rodent menace contact.
Made from thermally stabilised cross linked material for excellent insulation and weather resistant properties.
The boots are internally coated with a hot melt adhesive

Property	Test Method	Standard Value
Tensile Strength	ASTM-D-638	≥10MPa
Elongation at Break	ASTM-D-638	≥300%
Tensile Strength Variation After Heat Aging(130ºCx168h)	ASTM-D-5510	≤±20%
Elongation at Break Variation After Heat Aging(130ºCx168h)	ASTM-D-5510	≤±20%
Volume Resistivity	IEC 60093	≥1x1014Ω.cm
Dielectric Strength	IEC 60243	≥25kV/mm

Spec.	As Supplied/mm		After Recovered/mm
	D1 Min	D2 Min	D1 Max	D2 Max	W	W2
					(±10%)	(±10%)
Right Angle Boot
R1	80	35	36	19	5.6	5
R2	80	50	36	19	5.6	5
R3	80	50	36	28	5.6	5
R4	95	70	36	28	5.6	5
R5	145	70	72	34	5.6	5
In-line Bushing Boot
S1	80	34	32	19	3.6	3.6
S2	80	58	32	19	3.6	3.6
S3	140	90	68	34	3.6	3.6