| Customization: | Available |
|---|---|
| Rated Voltage: | 8.7/15kv |
| Accessories Type: | 1/3cores |
|
Still deciding? Get samples of US$ 20/Piece
Request Sample
|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
The 8.7/15kV cold shrink cable accessories are suitable for 3.6/6, 6/10, 8.7/10, and 8.7/15kV polyethylene cables. Made from liquid silicone rubber, they combine waterproofing,stress control, shielding, and insulation. With excellent electrical and mechanical properties, they are ideal for harsh environments. Lightweight and easy to install, widely used in power, oil, chemical, metallurgy,railway, port, and construction industries.
| Material name | Main material performance | Parameter | Main product performance | Parameter |
| Main cold shrink material | Hardness Shore (A) | 45±3 | AC withstand voltage test | 39kV, 5 minutes |
| Main cold shrink material | Tensile strength (Mpa) | ≥14 | Partial discharge test at room temperature | 15KV |
| Main cold shrink material | Permanent deformation rate | ≤5% | Impact voltage test | 95kV 95ºC ~100°C, |
| cold shrink insulation tube | Volume resistivity(Ω.cm) | ≥1X1014 | Partial discharge test at high temperature | 15kV 95°ºC ~100°C, |
| cold shrink termination tube | Breakdown strength (kV/mm) | ≥20 | Constant voltage load cycle test in air | 22kV |
| cold shrink stress control cone | Dielectric constant | ≈25 | Short circuit dynamic stability test | 85.0kA |
| No. | Applicable cable cross section | Outdoor termination kit | Indoor termination kit | Straight throught joint kit |
| 1 | 25-50 | WLS-15/3.1 | NLS-15/3.1 | JLS-15/3.1 |
| 2 | 70-120 | WLS-15/3.2 | NLS-15/3.2 | JLS-15/3.2 |
| 3 | 150-240 | WLS-15/3.3 | NLS-15/3.3 | JLS-15/3.3 |
| 4 | 300-400 | WLS-15/3.4 | NLS-15/3.4 | JLS-15/3.4 |
| 5 | 500-630 | WLS-15/3.5 | NLS-15/3.5 | JLS-15/3.5 |
){kind=link}