| Diameter |
Thickness before shrink(mm) |
Thickness after shrink(mm) |
| Φ12 |
0.63 |
1.25 |
| Φ16 |
0.75 |
1.5 |
| Φ20 |
0.80 |
1.6 |
| Φ25 |
0.85 |
1.75 |
| Φ30 |
0.90 |
1.85 |
| Φ40 |
0.98 |
2 |
| Φ50 |
0.98 |
2 |
| Φ60 |
1.05 |
2.1 |
| Φ70 |
1.05 |
2.1 |
| Φ80 |
1.15 |
2.3 |
| Φ90 |
1.15 |
2.3 |
| Φ100 |
1.20 |
2.4 |
| Φ120 |
1.25 |
2.5 |
| Φ150 |
1.25 |
2.5 |
| Φ180 |
1.30 |
2.6 |
| Φ200 |
1.30 |
2.6 |
Heat shrinkable tubing
Material: Polyolefin
Shrinkage Ratio: 2:1 (will maximum shrink to 1/2 its supplied diameter)
Operating Temperature: -55°C to +125°C
Minimum Shrinkage Temp: +70°C
Full Shrinkage Temp: +110°C
Maximum Tensile Strength: 10.4 Mpa
Mainly used for wire connection, solder joint protection, wire end harness, electronic device protection and insulation treatment, parts and metal surface protection, related product rust prevention, anti-corrosion treatment, wire and other product identification.
We specialize in heat shrinkable and cold shrinkable technology and manufacture. Our main products are XLPE and PILC cable heat & cold shrinkable termination kit, straight through joint kit with voltage not exceed 36KV, bus-bar tube, dual wall tube and end caps cable ties etc.
What's the difference between Heat Shrink and Cold Shrink?
Heat Shrink products offers a range of wall thicknesses and adhesive options that can be better tailored to your application, offering precise shrink ratios.
No tools are required with our Cold Shrink products, speeding up your installation time. Reduces chances of cable damage, since there is no heating element. The cold shrink technology is more versatile since there are no need for permits, and is safe for enclosed spaces.
Audited Supplier 
Audited Supplier 
){kind=link}
){kind=link}